C Series / E Series
LIFEBOOK
Switching on the notebook for the first time
When you switch on your notebook for the first time, the supplied software is installed and
configured. You should plan some time for this, as this process must not be interrupted.
To make it easier to use the notebook for the first time, the operating system has been preinstalled
on the hard disk.
2
Slide the release button in direction of the arrow (1) and open the LCD screen (2).
Ê
Press the Suspend/Resume button to switch on the notebook (3).
Ê
The power-on indicator
After switch-on a self-test (POST, Power On Self Test) is automatically carried out. Never
!
switch the notebook off during the self-test.
Leave the external power adapter connected to your notebook during the initial
installation.
Once the installation has been started, the notebook must not be switched off!
During installation, the notebook may only be rebooted when you are requested to do so!
6
1
of the notebook appears in the status indicator panel.
A26391-K136-Z100-1-7619