Table of Contents
Advertisement
Off
•
Power adapter is connected and the battery is fully charged.
•
Computer is running on battery and the battery has more than 5 percent charge.
•
Computer is in sleep state, hibernation, or turned off.
The power and battery-status light blinks amber along with beep codes indicating
failures.
For example, the power and battery-status light blinks amber two times followed by a
pause, and then blinks white three times followed by a pause. This 2,3 pattern
continues until the computer is turned off indicating no memory or RAM is detected.
The following table shows different light patterns and describes what they indicate.
Table 8. System diagnostic lights
Light pattern
2,1
2,2
2,3
2,4
2,5
2,6
2,7
3,1
3,2
3,3
3,4
The computer may emit a series of beeps during start-up if the errors or problems
cannot be displayed. The repetitive beep codes help the user troubleshoot problems
with the computer.
Camera status light: Indicates whether the camera is in use.
•
Solid white – Camera is in use.
•
Off – Camera is not in use.
114
Problem description
CPU failure
System board: BIOS and ROM failure
No memory or RAM detected
Memory or RAM failure
Invalid memory installed
System board or chipset error
LCD failure
CMOS battery failure
PCI or video card or chip failure
Recovery image not found
Recovery image found but invalid
Advertisement
Table of Contents
