Related Manuals for Milwaukee M12 FUEL 2522-21XC
Summary of Contents for Milwaukee M12 FUEL 2522-21XC
- Page 1 OPERATOR'S MANUAL Cat. No. 2522-20 M12 FUEL™ 3" CUT OFF TOOL WARNING To reduce the risk of injury, user must read and understand operator's manual.
-
Page 2: General Power Tool Safety Warnings
GENERAL POWER TOOL attached to a rotating part of the power tool may result in personal injury. SAFETY WARNINGS • Do not overreach. Keep proper footing and balance Read all safety warnings, instruc- WARNING at all times. This enables better control of the power tions, illustrations and specifica- tool in unexpected situations. - Page 3 another. Shorting the battery terminals together may balance, vibrate excessively and may cause loss of cause burns or a fire. control. • Under abusive conditions, liquid may be ejected • Do not use damaged wheels. Before each use, from the battery; avoid contact. If contact acci- inspect the wheels for chips and cracks.
- Page 4 Never attempt to remove the your capability; contact Milwaukee Tool or a trained cut-off wheel from the cut while the wheel is in professional for additional information or training.
-
Page 5: Specifications
Always remove battery pack before SPECIFICATIONS WARNING changing or removing accessories. Cat. No............2522-20 To insert the battery, slide the pack into the body Volts.............. 12 DC of the tool. Make sure it latches securely into place. Battery Type ..........M12™ Only use accessories specifically Charger Type..........M12™... - Page 6 3. Remove the dust shoe assembly (see "Install- 2. Install the correct wheel for the job, and rotate the ing, Removing, and Adjusting the Dust Shoe guard all the way forward. Assembly"). 3. Loosen the depth of cut wing nut and fully extend 4.
-
Page 7: Dust Collection
Install the dust shoe assembly gents containing ammonia. Never use flammable or when possible. combustible solvents around tools. Rely on premium power tools by Milwaukee if you’re looking for quality and efficiency.