Do not put the tip of a blower into the cavity beyond the lens mount area, so that the tip of the blower does not touch the image
sensor.
When cleaning the image sensor with a blower, do not blow too hard. If you blow the sensor too hard, the inside of the product
may be damaged.
If the dust remains even after you cleaned the product as described, consult the service facility.
During cleaning, the image sensor emits a vibrating noise. This is not a malfunction.
Cleaning may be performed automatically when the power is turned off.
Related Topic
Attaching/removing a lens
Anti-dust Function
5-054-865-11(1) Copyright 2023 Sony Corporation
33
TP1001127029