Installing The Drain Hose - LG T2402NTWB Owner's Manual

Installing the Drain Hose

• The drain hose should not be placed higher
than 100 cm above the floor. Water in the
appliance may not drain or may drain slowly.
1
Insert the band clamp onto the drain hose
elbow.
2
With the hose leading up from the elbow,
insert the elbow onto the drain outlet on the
back of Mini Washer.
3
Adjust the band clamp with pliers to keep
the hose securely in place and prevent
leaking.
16
Using the Drain Hose Connector
1
2
3
Band clamp
• Make sure the drain hose is not kinked or
pinched. This is a potential cause of drainage
problems or noise.
NOTE
• Depending on the installation environment,
you may have to purchase a separate drain
hose connector.
Band clamp
Connect the drain hose of Main Washer
and Mini Washer to the drain connector.
Attach each drain hose to the double drain
hose connector and tie them with the band
clamps.
Insert the drain hose connector into the
drain pipe/hole.
CAUTION
EN
Drain hose
connector