Positioning the markers
4 To position the X1 marker, press:
X1 Position
Set the X1 marker to the left edge of the pulse.
5 To position the X2 marker, press:
X2 Position
Set the X2 marker to the right edge of the pulse.
6 To position the Y1 marker, press:
Y1 Position
Set the Y1 marker to the bottom of the pulse.
7 To position the Y2 marker, press:
Y2 Position
Set the Y2 marker to the top of the pulse.
The display will be similar to
Figure 2-4. Signal custom measurements
Exercise 6. Making Measurements on the Signal
Figure
2-4.
Operating the Instrument
2-15