Seat Belt Reminders - GMC Hummer EV 2024 Owner's Manual

GMC Hummer EV Owner Manual (GMNA-Localizing-MidEast-16639039) -
2024 - CRC - 3/20/23
Regenerative Braking
When regenerative braking is active, the
regen battery icon appears green and will
show a green tail on the fill bar. The power
indicator gauge value shows the amount of
instantaneous power being regenerated.
Regenerative Power Limited
Regenerative power may be limited when
the high voltage battery is near full charge
or cold. This will affect the vehicle s
maximum regenerative braking power.
Watts To Freedom
Acceleration Mode Torque Gauge Shown
1. Progress Bar
2. Active Torque
3. Freedom Zone
4. Peak Hold Bar
The power indicator gauge is replaced with
the torque gauge while in Acceleration
Mode. It is located centered on the top of
the display. Follow the prompts on the
instrument cluster. See Acceleration Mode
(Watts to Freedom) 0 199.
Preparing : While the vehicle is preparing
the progress bars fill and appear blue.
Complete : As the vehicle has completed
preparation the progress bars show full with
a white line separating the active torque fill
from the freedom zones.
Ready : When the vehicle is stopped and
ready the white line disappears, and the
progress bars remain blue until the active
torque crosses into freedom zones.
Launch : As the vehicle launches the active
torque moves into the freedom zones and
the progress bars become orange. The peak
hold bars appear at the leading edge of the
active torque.
Torque Ramp Down : When the torque is
ramping down the peak bars are held where
the active torque peaked.
Freedom Zones Vacated : While the freedom
zones are vacated nothing further happens
until the launch run is exited and the
throttle is lifted.
Instruments and Controls
Throttle Lifted : As the throttle is lifted the
white lines close off the freedom zones. The
active torque decreases and the orange bars
turn back to blue to reflect the current
preparation state.
Peak Bars Removed : Finally, the peak hold
bars are removed after the vehicle exits
launch run.

Seat Belt Reminders

Driver Seat Belt Reminder Light
There is a driver seat belt reminder light on
the instrument cluster.
When the vehicle is started, this light
flashes and a chime may come on to remind
the driver to fasten their seat belt.
Then the light stays on solid until the belt is
buckled. This cycle may continue several
times if the driver remains or becomes
unbuckled while the vehicle is moving.
107