Diverting Calls - Sony Ericsson Walkman W800 User Manual

Calling
} More } Edit
the relevant tab and edit your voice
command.
To re-record a voice command
} Settings }
1
} Voice control } Voice dialling
} Edit
names.
2 Select a voice command
} Replace
3 Wait for the tone and say the
command.
Tips when recording and using voice
commands
If your phone cannot detect your voice
command, one of the following might
have happened:
•
You spoke too softly – try speaking
louder.
•
You held the phone too far away –
hold it as you do during a call.
•
The voice command was too short –
it should be around one second
long and more than one syllable.
•
You spoke too late or too soon –
speak immediately after the tone.
•
You did not record the voice
command when the handsfree was
attached – for voice control with
a handsfree kit, record when the
handsfree is attached.
30
This is the Internet version of the user's guide. © Print only for private use.
contact. Scroll to
the tab
General
} More
voice.
•
You used another intonation – use
the same intonation as in the
recorded voice command.

Diverting calls

If you cannot answer incoming calls,
you can divert them to another
number, for example, your answering
service.
When the Restrict calls function is
activated, some Divert calls options
are not available.
You can choose between the following
divert options:
• Divert always
– divert all calls.
• When busy
– divert calls if you are
already on the phone.
• Not reachable
– divert calls if your
phone is turned off or if you are
unreachable.
• No reply
– divert calls that you do
not answer within a specified time
limit.
To activate a call divert
} Settings }
1 the
} Divert
calls.
2 Select a call type and then one of
the divert options
tab
Calls
}
Activate.