Ericsson T66 User Manual page 25

Example of Pinyin Input
For example, to enter " µ¶ "
1. Press
"xin", "yin", "zho", "xio" are displayed on the
screen, and "xin" is inversed. Six candidate
characters including " µ " will also appear in the
candidate row.
2. Press , every candidate character will be
YES
numbered.
3. Press the key with the same number as displayed
above the character, the character is entered into the
text row.
4. And the character " $ " is also displayed in the
candidate row.
5. Repeat Step 3 to complete the input of " #$ ".
Note: If you press the key with the same number as
displayed above a candidate character, you can skip
Step 2 and input the desired character quickly.
Input Chinese Punctuation and Symbols
Press and hold
punctions and symbols.
, combination suggestions of
, to see the first screen of
To select and input symbols
1. Slide the Volume key to display the last and next
page, and move the inverse cursor to the symbol you
need by pressing
the symbol.
2. You can also use the following methods:
•Press , to move the cursor up
•Press , to move the cursor left
•Press , to move the cursor right
•Press , to move the cursor down
or . Press to input
YES
Chinese Input 25