Chapter 17
5. Wait a few minutes for the update and reboot to complete.
Note: If you fail to update the firmware for the router, please contact our
17 1 4
EasyMesh Satellite Update
EasyMesh Satellite Update allows you to remotely check and update the firmware of
the satellite devices connected to this router via EasyMesh.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
Update
section.
3. The router's satellite devices will appear on the table. Click
see whether the latest firmware is released. If you want to update a satellite device,
click
on the right of the corresponding device.
Note: The update will take a few minutes and the satellite router will reboot.
17 2
Backup and Restore Configuration Settings
The configuration settings are stored as a configuration file in the router. You can
backup the configuration file to your computer for future use and restore the router to
a previous settings from the backup file when needed. Moreover, if necessary you can
erase the current settings and reset the router to the default factory settings.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
•
To backup configuration settings:
Click
BACK UP
to save a copy of the current settings to your local computer. A '.bin' file
of the current settings will be stored to your computer.
System
>
Firmware
System Tools
>
Backup &
Technical
Support.
Update, and locate the
CHECK FOR UPDATES
Restore.
Manage the Router
EasyMesh Satellite
to
121