More Features; Data Calls; Alarm Clock - Sony Ericsson T300 User Manual

More features

Data calls

Data calls
To make data calls you need to connect your
phone to a computer, and then start the appropriate
software program.
Receive data calls
The procedure of receiving data calls depends on your
network and subscription. If you have separate numbers
for voice and data calls, your phone will recognize the
type of call.
To receive a data call (separate numbers)
1. Connect your phone to a computer.
2. Answer the call from within the software program (if it
does not answer automatically).
You cannot answer a data call by pressing the
on the phone.
One number
If you have a SIM card that does not support a separate
data number, the phone does not recognize the type of
incoming call.
If you want to receive a data call, you have to set the
phone to this option. Once you have set your phone
for a specific incoming call, it stays like this until you
change it.
To select the next incoming call type
• Scroll to Calls/Next call/Next incoming.

Alarm clock

The alarm can be set to ring at a specific time within
24 hours, or recurrently at a specific time on several
days. You can have both these alarms set at the same
time. Even if you have set your phone to silent, the alarm
and timer signals ring. The alarm clock also rings if the
phone is turned off.
key
YES
To set an alarm
1. Scroll to Organizer,
Recurrent alarm,
2. Enter the time,
and pressing
, Alarms, , Alarm or
YES YES
.
YES
and day, if recurrent, by scrolling
YES
.
,
YES
More features 61