Table of Contents
Advertisement
Available languages
Available languages
12
MIDAS DL16
MIDAS DL16 Controls
(1)
(2)
(13)
(14)
(15)
(16)
(17)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(18)
(7) STATUS LEDs show the operation mode
Step 2: Controls
of various features. See the Operation
Mode Chart for details. The HA LOCKED LED
indicates that preamp gain adjustment
(1) PHANTOM LEDs light when the 48V button is
has been blocked by the controlling M32.
engaged for a particular channel.
To unlock, open the M32 Setup/Global
page and un-check the General Preference
(2) MIDAS PRO mic/line inputs accept balanced
'Lock Stagebox'.
XLR male plugs.
(3) GAIN button, when pressed and held,
(8) CONFIG button, when pressed and held,
displays the currently selected mic input's
allows the device's operation mode to
gain setting, which may then be adjusted
be adjusted by the SELECT/ADJUST knob.
using the SELECT/ADJUST knob.
See Operation Mode Chart for details.
(4) DISPLAY shows the selected channel number,
(9) SELECT/ADJUST knob scrolls through the
its gain setting, or the sample rate in
16 channels, adjusts the gain of the currently
Snake Master confi guration.
selected input, and changes the operating
mode. Push repeatedly to scroll Inputs,
(5) NETWORK LINK LEDs light red to indicate
Outputs, P16 channels, ADAT outputs,
the AES50 ports are connected but not
and Stage (only in Snake Master mode).
synchronised, and light green to indicate
they are connected and synchronised.
(10)
LED METER displays the signal level of the
currently selected channel.
(6) 48 V button sends phantom power to the
currently selected mic input, indicated by a
(11)
MONITORING LEVEL knob adjusts the level of
lit button when active.
the PHONES output.
MIDAS DL16 Operation Mode Chart
LED
LED
LED
Seq.
sync clock
SN MASTER
SPLITTER
OUT +16
AES50
1 (default)
(console)
AES50
2
(console)
AES50
3
on
(console)
AES50
4
on
(console)
AES50
5
on
(console)
AES50
6
on
on
(console)
7
on
48 kHz (int)
8
on
44.1 kHz (int)
9
on
48 kHz (int)
on
10
on
44.1 kHz (int)
on
Quick Start Guide
(12)
XLR outputs accept balanced XLR
female plugs.
(13)
POWER switch turns the unit on and off .
(14)
USB input accepts a USB type-B plug for
fi rmware updates via PC.
(15)
AES50 ports A and B allow connection to a
SuperMAC digital multi-channel network
via shielded Cat-5e Ethernet cable with
terminated ends compatible to Neutrik
etherCON. NOTE: The clock master, typically
the digital mixer, must be connected to the
AES50 port A, while additional stage boxes
would be connected to port B.
(16)
ULTRANET port sends 16 channels to a
Behringer P-16 personal monitoring system.
(17)
ADAT OUT jacks send AES50 channels
17-32 to external equipment via optical
cable, or split the local 16 inputs for direct
ADAT recording.
(18)
MIDI IN/OUT jacks accept standard 5-pin
MIDI cables for MIDI communication to and
from an M32 console.
LED
XLR analogue
ADAT
ADAT
P-16 Ultranet
OUT +8
out 1-8
out 1-8
out 9-16
out 1-16
= AES50-A,
= AES50-A
= AES50-A
= AES50-A
ch01-ch08
ch17-ch24
ch25-ch32
ch33-ch48
= AES50-A
= AES50-A
= AES50-A
= AES50-A
on
ch09-ch16
ch17-ch24
ch25-ch32
ch33-ch48
= AES50-A
= AES50-A
= AES50-A
= AES50-A
ch17-ch24
ch17-ch24
ch25-ch32
ch33-ch48
= AES50-A,
= Local In
= Local In
= Local In
ch01-ch08
01 - 08
09 - 16
01 - 16
= AES50-A
= Local In
= Local In
= Local In
on
ch09-ch16
01 - 08
09 - 16
01 - 16
= AES50-A
= Local In
= Local In
= Local In
ch17-ch24
01 - 08
09 - 16
01 - 16
= AES50-A,
= AES50-A,
= AES50-A
= AES50-A
ch01-ch08
ch01-ch08
ch09-ch16
ch01-ch16
= AES50-A,
= AES50-A,
= AES50-A
= AES50-A
ch01-ch08
ch01-ch08
ch09-ch16
ch01-ch16
= AES50-A,
= Local In
= Local In
= Local In
ch01-ch08
01 - 08
09 - 16
01 - 16
= AES50-A,
= Local In
= Local In
= Local In
ch01-ch08
01 - 08
09 - 16
01 - 16
13
Advertisement
Table of Contents
