Sony Ericsson M608c User Manual page 18

Changing input type
You can change your text input type as
described in the list below. Icons are displayed
in the statusbar to show selected input type.
First letter upper case
Aa
Press once followed by, for
example, the left side of
capital . Any additional keys pressed
E
will be displayed in lowercase.
All upper case
A
Press twice for caps-lock. Any
additional keys pressed will be
displayed in uppercase until
pressed again to remove caps-lock.
First character an upper character
12
Press once followed by, for
ALT
example,
U I
for example, the right side of
type the character
pressed will display the characters on
the lower part of the keys.
All upper characters
123
Press twice to lock the characters
ALT
at the top of the keys. Any additional
keys pressed will type the upper
characters until
18 Getting to know your phone
This is the Internet version of the user's guide. © Print only for private use.
to write a
E R
is
to type the number
3
! /
Q W
. Any additional keys
/
is pressed again.
ALT
Note: Simultaneously pressing
character key will insert an uppercase
character. Releasing
will revert the case to lowercase. The same
principle applies when
pressed to access a symbol from a key.
To input Chinese characters
A: Element bar: The area to display Pinyin/
, or
Stroke input by users when the users want
to
to input Chinese through pinyin/stroke
input method. Element bar border can be
adjusted with flush right according to the
pinyin/stroke input length.
B: Candidates bar: The area which to display
the candidates according to Pinyin input by
the users. There are at most nine Chinese
single character candidates per row.
C: Display Area: The area which to display
the characters.
with a
after this action
and a key is
ALT
M608c