Table of Contents
Advertisement
Presetting the Radio Stations
You can preset 50 stations for FM and AM (MW). Before
tuning, make sure that you have turned down the volume.
1. Press BAND on the Remote Control until FM or AM
(MW) appears in the display window.
2. And then every time you press BAND, FM and AM
(MW) changes alternately.
3. Press and hold TUN.(-/+) for about two seconds until
the frequency indication starts to change, then
release.
Scanning stops when the DVD/CD Receiver tunes in a
station.
4. Press PROG./MEMO. on the Remote Control.
A preset number will flash in the display window.
5. Press PRESET +/- on the Remote Control to select
the preset number you want.
6. Press PROG/MEMO on the Remote Control again.
The station is stored.
7. Repeat steps 3 to 6 to store other stations.
Playing an Audio CD or MP3/WMA/JPG/DivX file
Playing an Audio CD or MP3/WMA file
This unit can play Audio CDs or MP3/WMA files.
MP3/ WMA/ Audio CD
Once you insert a cd with MP3/WMA files or Audio, a
menu appears on the TV screen.
Press v / V to select a track/file and then press PLAY or
ENTER, and playback starts. You can use variable
playback functions. Refer to the page 5,6 or 7.
ID3 TAG
When playing a file containing information such as track
titles, you can see the information by pressing DISPLAY.
[ Song, Artist, Album, Genre, Comment ]
Tips:
Press MENU to move to the next page.
On a CD with MP3/WMA and JPEG, you can switch
MP3/WMA and JPEG. Press TITLE, and MUSIC or
PHOTO top of the menu is highlighted.
Programmed Playback
The program function enables you to store your favorite
tracks from any disc in the receiver memory. A program
can contain 300 tracks.
1. Insert a disc. Audio CD and MP3/WMA Discs:
2. Select a track on the "List", and then press PROG. or
select "
(Add)" icon and then press ENTER to
place the selected track on the "Program" list. Repeat
to place additional tracks on the list.
Note: You can add all tracks in the disc. Select "
( Add All)" icon then press ENTER.
3. Select the track you want to start playing on the
"Program" list. Press MENU to move to the next page.
4. Press PLAY or ENTER to start. Playback begins in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the "Program"
list have played once.
5. To resume normal playback from programmed
playback, select a track of AUDIO CD (or MP3/WMA)
list and then press PLAY.
To tune in a station with a weak signal
Press TUN.(-/+) repeatedly in step 3 to tune in the station
manually.
To clear all the stored stations
Press and hold PROG./MEMO. for about two seconds
and "ERASE" appears in the display window and then
press PROG./MEMO. again, the stations are cleared.
If you have accidentally entered into the "ERASE"
mode and you do not wish to clear the memory, do not
press any key. After a few seconds, the "ERASE" will
go off by itself and change to normal mode.
Note:
If all stations have already been entered, the FULL
message will appear in the display window for a moment
and then a preset number will flash. To change the preset
number, follow steps 5-6 as above.
Repeat Programmed Tracks
1. Press REPEAT when playing a disc. The repeat icon
appears.
2. Press REPEAT to select a desired repeat mode.
• TRACK: repeats the current track
• ALL: repeats all the tracks on programmed list.
• Off(No display): does not play repeatedly.
Erasing a Track from "Program" List
1. Use v V to select the track that you wish to erase
from the Program list.
2. Press CLEAR. Alternatively, select "
then press ENTER to place the selected track on the
Program list. Repeat to erase additional tracks on the
list.
Erasing the Complete Program List
Use v / V to select "
(Del all)" and then press ENTER.
Note: The programs are also cleared when the disc is
removed.
Viewing a JPEG file
This unit can play discs with JPEG files.
Before playing JPEG recordings, read the notes on JPEG
Recordings on the right.
1. Insert a disc and close the tray.
The PHOTO menu appears on the TV screen.
2. Press v / V to select a folder, and then press ENTER.
A list of files in the folder appears. If you are in a file
list and want to return to the previous Folder list, use
the v / V buttons on the Remote to highlight
press ENTER.
3. If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY. While
viewing a file, you can press STOP to move to the
previous menu (JPEG menu).
(Delete)" icon
and
9
Advertisement
Table of Contents
