Changing The Headlight Bulb - Husqvarna FE 450 EU 2020 Owner's Manual

15.8

Changing the headlight bulb

Note
Damage to reflector Grease on the reflector reduces the light intensity.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
–
Position the brake line and the wiring harness in the cable
guide.
–
Mount and tighten screw
–
Position the headlight mask.
The holding lugs engage in the fender.
H03752-10
–
Secure the headlight mask with rubber straps
H03749-11
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Remove the headlight mask with the headlight. (
ELECTRICAL SYSTEM 15
2
.
3
.
p. 119)
p. 115)
117