Table of Contents
Advertisement
SETTING UP YOUR TV
DTV Manual Tuning
NOTE: This feature varies depending on the Ant/Cable
setting.
Manual Tuning
This feature is available for service engineers or can be
used for direct channel entry if the multiplex channel is
known.
a
Select DTV Manual Tuning from the Channel
Tuning menu and press OK.
DTV Manual Tuning - Antenna
WEAK
Signal Strength
Signal Quality
Channel
Frequency
Bandwidth
Start Scan
b
Enter the multiplex number using the number
C
buttons or use
/
down.
c
Highlight Start Scan and press OK. The television
will automatically search for that multiplex.
DTV Manual Tuning - Antenna
0 New Channels - Total 6
New
Pos.
1
2
7
ABC THREE
40
ABC NEWS 24
51
When the multiplex is found, any channels that are
not currently in the channel list will be added and
the channel information at the top of the screen will
be updated.
d
Repeat as necessary. Press EXIT to finish.
Manual Tuning for DVB-C
When Ant/Cable/Satellite is set to Cable, DTV Manual
Tuning items are as follows:
Frequency: Input a specific frequency to be scanned
Modulation: Choose from one of five QAM modulation
options
Symbol Rate: Input a specific baud rate (KS/s) to be used
for the manual scan
Highlight Start Scan and press OK.
AVERAGE
STRONG
GOOD
67
842.0 MHz
8 MHz
c
to adjust the number up or
Name
Type
ABC ONE
ABC TWO
ABCi
DTV Settings
Channels (Antenna/Cable)
The channel order may be changed to suit your personal
a
Select DTV Settings from the Installation menu
and press OK.
b
b
Press
to select Channels and press OK.
< DTV Settings
Channels
Subtitle and Audio
Parental PIN Setup
Parental Control
Local Time Setting
Standby Channel Update
Common Interface
c
For your convenience, you can jump to specific
places in the list by one of two methods.
Channels
Line No.
1/10
Pos.
Name
1
ABC ONE
2
ABC TWO
7
ABC THREE
30
CABC Channel
40
ABC NEWS 24
51
ABCi
822
AA
823
AC
Line Number Jump
buttons (0-9) to input the line number you want to
select and press OK.
It is also possible to change the Position number of
a particular channel.
Renumber
renumber the highlighted channel. Edit the
channel number using the number buttons and
press OK. If the position number you input already
exists, a confirmation window will appear.
Pos.
Name
ABC ONE
22
preference.
Antenna TV
— Use the number
— Press the RED button to
Advertisement
Table of Contents
