Table of Contents
Advertisement
Adjusting the System
1.
Press the MENU button to open the OSD.
2.
Using the Navi/OK button, select System from the OSD. Then navigate to
the setting you wish to adjust.
3.
Use the Navi/OK button to select the setting.
4.
Input: Select the source from an available input source.
5.
Auto Source: Automatically searches for available input sources.
6.
Hot Key Assignment: Select the function of Hot Key 1 or Hot Key 2.
7.
Wide Mode: You can select which screen aspect you are using. The
options are Full and Aspect.
8.
DDC/CI: Allows the monitor settings to be set through the software on
the PC.
9.
HDMI Black Level: You can select the level of blackness under HDMI
source. The options are Normal and Low.
10. Quick Start Mode: Enable monitor rapidly.
11. Power-off USB charge (Optional): Turn On or Off.
EN-20
Advertisement
Table of Contents
