Table of Contents
Advertisement
1.
2.
3.
Removing memory media
The following instructions apply to all types of supported media devices. To
remove memory media, do the following:
1.
2.
3.
4.
User's Manual
Turn the memory media so that the contacts (metal areas) face down.
Insert the memory media into the memory media slot on the computer.
Press the memory media gently until it clicks into place.
1. Memory media slot
Product appearance depends on the model you purchased.
Make sure that the memory media is oriented properly before you
insert it. If you insert the media in wrong direction, you might not be
able to remove it.
When inserting the memory media, do not touch the metal contacts.
You could expose the storage area to static electricity, which can
destroy data.
Do not turn off the computer or switch to Sleep Mode or Hibernation
Mode while files are being copied. Failure to do so might cause data
loss.
Click the Safely Remove Hardware and Eject Media icon on the
Windows taskbar.
Select memory media.
Push the memory media until you hear a click to partially release it.
Grasp the media and pull it out of the slot.
If you remove the memory media or turn off the power while the
computer is accessing the memory media, you might lose data or
damage the media.
Do not remove the memory media while the computer is in Sleep or
Hibernation Mode. The computer could become unstable or data in
the memory media could be lost.
Figure 4-5 Inserting memory media
1
2. Memory media
2
4-13
Advertisement
Table of Contents
