Connecting The Notebook To The Thunderbolt™ Port Replicator - Fujitsu LifeBook U9313X Operating Manual

Connecting the notebook to the Thunderbolt™ Port Replicator
► Remove the USB port Intel® Thunderbolt
display port (USB 4.0 Type-C) on the notebook.
► Connect one end of the supplied Thunderbolt cable (USB Type-C) to the Intel®
Thunderbolt 4 USB port on the notebook (1).
TM
► Connect the other end of the Thunderbolt cable (USB Type-C) to the Thunderbolt port for
data connection and power supply (USB Type-C) on the port replicator (2).
Use only the Thunderbolt cable supplied with your Thunderbolt™ Port
Replicator for the connection from the notebook to the Thunderbolt™ Port
Replicator in order to ensure an error-free connection.
When the notebook is connected to a Port Replicator, the operating system creates
a hardware profile for the "Docked" mode. In this profile, for example, the setting is
saved as to which monitor was last used for output. This profile will be loaded, as
soon as the notebook is connected to a Port Replicator of the same type.
Fujitsu
TM
1
2
Working with the notebook
4 with charging function and
57