Dell UltraSharp 27 User Manual page 48

Icon Menu and
submenu
Auto
Brightness
Range Level
Auto Color
Temp.
Primary
Monitor for
Sync
Reset
Brightness/
Contrast
48 | Operating the monitor
Description
When Auto Brightness is turned on, adjust the range level
of the Auto Brightness.
NOTE: When Auto Brightness is turned off, this function
is not available.
UltraSharp 27 Monitor
Brightness/Contrast
Input Source
Color
Display
PIP/PBP
Menu
Personalize
Others
Turns on Auto Color Temp and adjusts the monitor RGB
color settings in accordance with the ambient light.
When either Auto Brightness or Auto Color Temp. is
turned on and multiple Dell monitors that support this
function are connected through MST, the monitors will
adjust their brightness or RGB settings according to the
ambient light condition detected by the primary monitor.
NOTE: The selected monitor in Dell Display Manager (DDM)
is the primary monitor. To change the primary monitor, select
the preferred monitor in DDM. Refer to the DDM user guide
for details.
NOTE: When Auto Brightness and Auto Color Temp. are
both turned off, this function is not available.
NOTE: If the primary or secondary monitor breaks off from
the MST, it also breaks off from the monitor sync.
Resets all settings under the Brightness/ Contrast menu
to the factory defaults.
Brightness
Contrast
Auto Brightness
Auto Brightness Range Level
Auto Color Temp.
Primary Monitor for Sync
Reset Brightness/Contrast
Low
Mid
High
Exit