Using This System For Tv Audio - Pioneer HTP-55 Operating Instructions Manual

Connecting up
6 If you have a DVD player or other source
component you want to connect, connect it now before
connecting the power cord in the next step.
See Connecting auxiliary components on page 27 for how
to connect a digital source component. See also Using
this system for TV audio below to connect a TV.
7 Connect the power cord.
• Connect the power cord to AC inlets on the receiver
subwoofer. Connect the power cord to a wall socket.

Using this system for TV audio

If your TV has a stereo audio output you can connect it to
this system and enjoy surround TV sound.
CONTROL SPEAKERS
DVD/DVR 1
SYSTEM CONNECTOR
OUT R L
SUB WOOFER SURROUND (COAXIAL)
USE ONLY WITH
DISPLAY UNIT
CENTER R FRONT L
AC IN
1 Connect the AUDIO OUTPUT jacks on your TV to the
ANALOG AUDIO INPUT jacks on the receiver subwoofer.
Use the red/white stereo audio cable (not supplied) for
this connection. Make sure you match the left and right
outputs with their corresponding inputs for correct
stereo sound.
• You can use the ANALOG AUDIO INPUT jacks for any
analog source you want, such as a tape deck, etc.
Note
1 Make sure to connect a TV or monitor (for video sources) to take advantage of this system's home theater potential. Please refer to the instruc-
tion manual supplied with your TV or monitor for connection details.
2 • Do not use any power cord other than the one supplied with this system.
• Do not use the supplied power cord for any purpose other than connecting to this system.
1
2
AUDIO INPUT
DIGITAL
DVD/DVR 2 DIGITAL ANALOG
(OPTICAL) (OPTICAL)
L
R
1
AUDIO
OUTPUT
TV
02
13
En