Table of Contents
Advertisement
02 Delay End
03 Water Level
04 Wash
05 Rinse
06 Power Spin
07 Activ Dual
Wash
08 Power Wash
09 Magic Wash
10 Power
11 Start/Pause
12 Cycle Panel
WA5700JS(PREMIUM)-03516B-03_EN.indd 27
Press this button to finish the wash at a specified time.
To cancel the Delay End settings, simply turn off the washing
machine.
You can set the Delay End time up to 19 hours.
The water level is adjusted according to the cycle. However, you can
change the level manually.
Press to start washing, or adjust the wash time between 6 and 30
minutes.
Press to run the rinse cycle, or change the rinse count up to 5.
Press to run the spin cycle, or change the spinning time in this
sequence: 1-9 min (increase by 1 minute) > 15 min > 30 min.
This button provides two options, and is available only when the
washing machine is stopped or in Standby state.
•
Water Save (default): Select to reuse water in the tub that remains
after using Water Jet. The water will be used for the main cycle.
Drain: Select to drain water that remains after using Water Jet.
•
When draining is complete, the washing machine switches to
Water Save mode automatically. Then, you can choose a cycle.
Power Wash introduces a digital inverter motor to fine-tune the
water-flow level for washing and spinning.
Magic Wash lets you adjust the water-flow level for washing and
spinning. Three options are available: LOW, MIDDLE, and HIGH.
Press once to turn the machine on, or twice to turn it off.
Press to stop or resume operation. To change the cycle sequence,
press once to stop operation, and then change the sequence. To
resume operation, press again.
Choose one that best suits your needs.
English 27
2015-07-13
6:55:48
Advertisement
Table of Contents
