Advertisement
KEYLESS
CHUCK
See Figure 14.
A keyless chuck has been provided with your drill to allow
for easy installation and removal of bits. As the name
implies, you can hand tighten or release drill bits in the
chuck jaws. Arrows on the chuck indicate which direction
to rotate the chuck sleeve in order to LOCK (tighten) or
UNLOCK (release) the chuck jaws. Loosen the chuck
sleeve by rotating it counterclockwise
with one hand.
Insert drill bit into the chuck the full length of the jaws,
tighten securely by rotating the chuck sleeve in clockwise
direction.
CHUCKJAWS
UNLOCK
DRILLBIT
LOCK
(Tighten)
CHUCKSLEEVE
RIGHT
Fig. 14
WARNING:
Do not hold chuck sleeve with one hand
and use power of the drill to tighten chuck jaws on
drill bit. Chuck sleeve could slip in your hand or your
hand could slip and come in contact with rotating drill
bit. This could cause an accident resulting in serious
personal injury.
ADJUSTABLE
TORQUE
CLUTCH
Your drill is equipped with an adjustable torque clutch for
driving different types of screws into different materials.
The proper setting depends on the type of material and
the size of screw you are using.
TO ADJUST
TORQUE
•
Identify the twenty four torque indicator settings
located on the front of your drill. See Figure 15.
•
Rotate adjusting ring to the desired setting.
1 - 4
For driving small screws.
•
5 - 8
For driving screws into soft
material.
•
9 - 12
For driving screws into soft and
hard materials.
• 13 - 16
For driving screws in hard wood.
• 17 - 20
For driving large screws.
• 21 - 4111
For heavy drilling.
TO DECREASE ADJUSTING RING
TORQUE
TOINCREASE
TORQUE
Fig. 15
Note: Remember the two-speed feature (HI-LO) when
setting torque. The amount of torque will vary depending
on which speed setting you have your drill. Switching to
LO speed will increase torque. Switching to HI speed will
decrease torque,
BIT STORAGE
See Figure 16.
When not in use, bits provided with your drill can be
placed in the storage area located on the top of your drill
as shown in Figure 16.
SCREWDRIVER
BIT
BIT
STORAGEAREA
SCREWDRIVER
BIT
Fig. 16
13
Advertisement
