HP procurve 5300xl Series Access Security Manual page 231

Configuring and Monitoring Port Security
Port Security Command Options and Operation
Without port parameters, displays Operating Control settings
show port-security
for all ports on a switch. For example:
Figure 9-2. Example Port Security Listing (Ports A7 and A8 Show the Default
Setting)
With port numbers included in the command, show port-security displays Learn
Mode, Address Limit, (alarm) Action, and Authorized Addresses for the spec­
ified ports on a switch. The following example lists the full port security
configuration for a single port:
Figure 9-3. Example of the Port Security Configuration Display for a Single Port
The following command example shows the option for entering a range of
ports, including a series of non-contiguous ports. Note that no spaces are
allowed in the port number portion of the command string:
HPswitch(config)# show port-security A1-A3,A6,A8
9-7