PROBLEM
Plastic
items are
discoloured
(e.g. stain left
by tomato
sauce)
Display
flashing while
Keylock is on
White stains
are left
on dishes;
glasses
have a milky
appearance
Dishes,
cutlery have
not dried
Glasses
have dull
appearance
Tea stains
or traces of
lipstick have
not been
completely
removed
Traces of rust
on cutlery
Glasses
clouded and
discoloured;
milky coating
34
TROUBLESHOOTING
POSSIBLE CAUSE
Not enough detergent,
not pre-rinsed.
This is normal. The display
remains on although the
buttons are disabled.
Not enough detergent.
Rinse aid dosage too low.
Rinse aid dosage too low.
Items removed too soon.
Rinse aid dispenser empty.
(The rinse aid indicators
are lit.)
Rinse aid dosage too low.
Not enough detergent.
Wash temperature too low.
Cutlery is not
sufficiently rustproof.
Hard water situation.
Glasses are not
dishwasher proof.
WHAT TO DO
Pre-rinse plastic dishes before
placing in the dishwasher and/or add
more detergent.
Alternatively, using the Rinse
program after adding dishes may
minimise staining.
No action required.
Refer to 'Detergent' for recommended
quantities. You may need to adjust these
to suit the hardness of your water supply.
Increase rinse aid dosage.
Refer to 'Rinse aid'.
Increase rinse aid dosage.
Refer to 'Rinse aid'.
After the end of the wash program, leave
the door ajar and wait for several minutes
to help drying.
Add rinse aid. Refer to 'Rinse aid'.
Increase rinse aid dosage.
Refer to 'Rinse aid'.
See section 'Detergent' for recommended
quantities. You may need to adjust these
to suit your particular load.
Select a wash program for heavily
soiled dishes. Refer to 'Wash programs'
for information.
Wash by hand.
Increase detergent quantities.
Wash by hand.