Important Safety Instructions - Rinnai RRJH2 User Instructions

Important Safety Instructions

Thank you for choosing RINNAI products. The following instructions are very important
to safety operation of gas cooker. Please read through them carefully. For any
enquiries and service requests, please call Customer Services Hotline 2232 1111.
Installation
1. Use approved gas tubing bearing EMSD approval marking (such as: 機電工程署批
准 EMSD APPROVAL GTXXXX) for connection to appliance, or other appropriate
methods accepted by EMSD.
2. Install the appliance in a well-ventilated room.
3. Keep it away from any combustible or inflammable of objects such as paper or oil,
with a distance of more than 150mm from combustible materials.
4. Do not place any combustible materials below hotplate, e.g. paper or plastic mat.
Operation
1. In case of suspected gas leak, open windows and shut off gas meter valve and/or
appliance isolating cock. Do not operate any electric appliances or switches. Do not
use any phones on site. Contact gas supply company with a phone outside the
premises.
2. Please use the appliance properly according to the operating instructions.
3. Do not use gas hob for any purposes other than cooking, e.g. drying clothes.
4. This appliance is designed for domestic use only.
5. Do not add aluminum discs to burners. This will incur combustion problem.
6. Open the windows and turn on ventilation system before operating gas hob.
7. Do not leave operating gas hob unattended.
8. Do not fill water including soup ingredients over two-thirds of utensil volume when
boiling water or soup. Spilled liquid of boiling will affect combustion and damage the
gas hob.
9. Heed high temperature of top plate, burners and pan supports.
10. Do not use flat bottom pot of diameter larger than 300mm to avoid the risk of scald by
high temperature and reduce the service life of the appliance.
11. When using small utensil, reduce flame power that flame does not escape from
utensil bottom.
12. Top plate is fixed. Do not remove it.
13. Do not clean the top plate when the appliance is hot.
14. Ensure stability of utensil resting on pan support. Hold utensil firmly if it slips easily.
15. Do not put weight exceeding 10kg on each pan support.
16. Pan support is heavy. Do not drop it.
17. Pan support gets hot after usage. Clean after cooling down.
18. Ensure that burners are not deformed and flames are evenly distributed. Contact
gas importer to replace to replace the parts if there is abnormality.
19. Before ignition, ensure the burner cap and pan support are in correct position and
do not incline.
20. Ensure that flame holes of burner are free from water and dirt.
21. Do not allow children to use appliance.
22. Do not press the knob more than 10 seconds. If the burner is not ignited after 10
seconds, open the door of the room and wait at least 1 minute before making a
further attempt.
— 10—