Table of Contents
Advertisement
2nd
3rd
Off Timer Plus
Off Timer
Eco Timer
PC/AV Mode
Source Detection
Key Repeat Time
Power LED On
Self Diagnosis
Description
•
Off
Timer: Turn on
Off Timer
mode.
•
Turn Off
After: The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of
hours.
― This option is only available when
Off Timer
― For products for the market in some regions, the
with power supply regulations. If you do not want the timer to activate, go to
•
Eco
Timer: Turn on
Eco Timer
mode.
•
Eco Off
After: The
Eco Off After
can be set between 10 and 180 minutes. The product will automatically power off after the specified time has
elapsed.
― This option is only available when
Eco Timer
Set
PC/AV Mode
to AV. The picture size will be enlarged.
This option is useful when you view a movie.
― Products with a display area of 16:9 or 16:10 are only supported.
― If the product is in HDMI,
DisplayPort
mode and the screen says
display the Function Key Guide screen and then select
― If input source is AV device, the screen may not display properly or there is no sound. Set
Select either Auto or Manual as the method to recognize input signal.
Control the response rate of a button when the button is pressed.
Acceleration,
1
sec, or
2 sec
can be selected. If
Configure the settings to enable or disable the power LED located at the lower part of the product.
•
Working: The power LED is on when the product is turned on.
•
Stand-by: The power LED is on when the product is turned off.
Perform this test when you experience a problem with your monitor's picture.
― Never turn off the power nor change the input source during self diagnosis. If possible, try not to interrupt testing.
is set to On.
Off Timer
is set to automatically activate 4 hours after the product powers on. This is done in accordance
→
System
→
is set to On.
Check the cable connection and the settings of the source device.
→
System
→
PC/AV Mode
→ HDMI,
PC/AV Mode
No Repeat
is selected, a command responds only once when a button is pressed.
Off Timer Plus
and set
Off Timer
to Off.
press the JOG button to
DisplayPort
→
PC
or AV.
to AV.
24
Advertisement
Table of Contents
