Table of Contents
Advertisement
FRONT SEAT FEATURES
SET FRONT SEAT MEMORY POSITIONS
With the ignition On or in Accessory mode:
1. Adjust the driver's
seat, power steering
column and power
outside mirrors to the
desired positions.
2. Press and release the
SET button on the
driver's door. A beep
will sound.
3. Immediately press
and hold button 1 or 2 until two beeps sound. Use the button
that matches the Driver Information Center welcome message
indicating driver 1 or 2.
To store seat and power steering column positions for more
clearance when exiting the vehicle, repeat the steps using the
Exit button instead of button 1 or 2.
RECALL FRONT SEAT MEMORY POSITIONS
Press and hold button 1, 2 or
reached.
The memory/exit positions can be programmed to be recalled
automatically when the ignition is turned on/off (for exit recall,
the driver's door must be opened).
To set the automatic recall options, go to Settings > Vehicle >
Seating Position > Set Entry Memory and Set Exit Memory.
See Seats and Restraints in your Owner's Manual.
Exit until the set position is
REAR SEAT FEATURES
ENTER OR EXIT THE 3RD-ROW SEATS
1. Remove anything on
the 2nd-row seat or
the floor in front of
the seat.
2. Pull the lever on top
of the seatback (A)
and pull the seat for-
ward. The driver-side
seat will tip and slide
forward. The passen-
ger-side seat will tip,
pitch and slide forward for additional space. The passenger-side
seat also can be moved with a forward-facing child restraint
installed.
3. After entering or exiting, push or pull the seatback rearward
until the seat locks in place.
SLIDE THE 2ND-ROW SEAT
Lift the bar under the seat cushion to slide the seat forward or
rearward.
RECLINE THE 2ND-ROW SEAT
Pull the lever on the side of the seat cushion and move the seat-
back to the desired position. Release the lever.
14
A
See Seats and Restraints in your Owner's Manual.
Advertisement
Table of Contents
