Shoulder Strap Attachment; Tripod Mounting - JVC GR-AXM66EG(SH) Manual

3
2
1
4
Downloaded from:
2
1
https://www.usersmanualguide.com/

Shoulder Strap Attachment

ATTACH STRAP
1
Following the illustration at left, thread the strap
through the top of the eyelet
and thread it through the keeper
through the buckle
attach the other end of the strap to the other eyelet
4
, making sure the strap isn't twisted.
ADJUST LENGTH
2
Adjust as shown in the illustration at left
slide both keepers snug against the eyelets to
2
prevent slipping

Tripod Mounting

ALIGN AND TIGHTEN
1
Align the screw and camera direction stud on the
tripod with the camera's mounting socket and stud
hole. Then tighten the screw.
CAUTION:
When using a tripod, be sure to open and extend
its legs fully to stabilize the camcorder. To
prevent damage to the unit caused by falling
over, do not use a small-sized tripod.
EN
1
, then fold it back
2
, and then
3
. Repeat the procedure to
1
.
11
, then