Connector And Cable Guide - Lenovo Thinkpad S2 2nd Gen Hardware Maintenance Manual

Connector and cable guide

This topic provides information to help Lenovo authorized service technicians identify connectors and cables
for replacement purpose. To view each FRU and the exploded illustration of the computer, see "Major
FRUs" on page 48 and "LCD FRUs" on page 50.
Note: Depending on your computer model, some connectors or cables might not be available.
System board connectors and cables
Table 10. System board connector and cable guide
Item
Connector (location)
1
Built-in battery connector (internal)
2
Trackpad connector (internal)
3
M.2 solid-state drive connector
(internal)
4
Fingerprint reader card connector
(internal)
5
ThinkPad-logo-LED card
6
Media card reader connector
(internal)
7
Speaker assembly connector
(internal)
Internal cable required
Built-in battery cable
Trackpad cable
No
Fingerprint reader card cable
ThinkPad-logo-LED card cable
Media card reader cable
Speaker assembly cable
Cable connection
The built-in battery comes with
cable. Connect the cable to this
connector.
Connect one end to the trackpad
and the other end to this connector.
Insert the M.2 solid-state drive into
this slot.
Connect one end to the fingerprint
reader card and the other end to
this connector.
ThinkPad-logo-LED card comes
with cable. Connect the cable to
this connector.
Connect one end to the media
card reader and the other end to
this connector.
The speaker assembly comes with
cable. Connect the cable to this
connector.
.
Chapter 7 Locations
51