Table of Contents
Advertisement
8
TPF1.4A LA
Fig. 13
Fig. 14
Step 4. Disconnect the HD PCB, the Side AV PCB, the KEY PCB , the
IR PCB,
the Scaler PCB and power PCB
Fig. 15
Step 5 Remove the MAIN Frame ASSY as Fig.16~Fig.18
a.
Remove the 19 screws and one connector as Fig.16~17
Step 6 Remove the Bezel assy as Fig.18~Fig.19
a.
Remove the 8 screws
as Fig.18
b .
Remove the Bezel assy
as Fig.19
Fig. 16
4. Mechanical Instructions
as Fig.15
4.2 Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
a. While re-assembling, make sure that all cables are placed
b. Pay special attention not to damage the EMC foams at the
In warranty, it is not allowed to disassembly the LCD panel, even the
backlight unit defect.
Out of warranty, the replacment of backlight unit is a correct way
when the defect is cused by backlight (CCFL,Lamp).
Fig. 17
Fig. 18
Fig. 19
and connected in their original position.
SSB shielding. Check that EMC foams are put correctly on
their places.
Advertisement
Table of Contents
