Creative Sound Blaster ZxR User Manual page 20

Connecting your headphones and headsets to the ACM
Jack, Connector or Cable
1. 3.5mm Headphone jack
2. 3.5mm Microphone In jack
Note:
When two headphones are being connected to the 6.3mm and 3.5mm Headphone jacks simultaneously,
you will be able to hear both headphones with the same output.
However, the Microphone In jacks on the ACM follow the priority sequence listed below:
Priority 1: 6.3mm Microphone In jack
l
Priority 2: 3.5mm Microphone In jack
l
Priority 3: Built-in Beamforming Microphone
l
For example, when user plugs in external microphones to both 6.3mm and 3.5mm Microphone In jacks,
the 6.3mm Microphone In jack will take priority over the 3.5mm Microphone In jack and the built-in
Beamforming Microphone. However, when no microphone is connected to all Microphone In jacks, the
built-in Beamforming Microphone will function.
2
1
Description
Connects to stereo headphones or headsets
with a 3.5mm (1/8-inch) plug.
Connects to microphones with a 3.5mm
(1/8-inch) plug.
OR
Connecting Speakers and Headphones 19