Table of Contents
Advertisement
CPU Overheated
If the system shutdown automatically after power on system for seconds, that means
the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown automatically to avoid a
damage of the CPU, and the system may not power on again.
In this case, please double check:
1.
The CPU cooler surface is placed evenly with the CPU surface.
2.
CPU fan is rotated normally.
3.
CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection function.
1. Remove the power cord from power supply for seconds.
2.
Wait for seconds.
3.
Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See "Close CMOS Header: JCMOS1" section)
2.
Wait for seconds.
3.
Power on the system again.
Hi-Fi A88S3E / Hi-Fi A78S3E
29
Advertisement
Table of Contents
