Troubleshooting - Siemens KG39N2IDF User Manual

Table of Contents

Advertisement

14 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
staff.
Only use genuine spare parts when repairing the appliance.
If the power cord of this appliance is damaged, it must be replaced by the
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
The appliance is not
cooling, the displays
and lighting are lit.
The LED lighting does
not work.
Side panels of the ap-
pliance are warm.
The temperature dis-
plays and
light up.
A warning tone
sounds and the set
temperature (refriger-
ator compartment)
and
flash.
A warning tone
sounds and the set
temperature (freezer
compartment) and
flash.
Cause and troubleshooting
Showroom mode is switched on.
Press and hold
1.
audible signal sounds.
After a short time, check whether your appliance is
2.
cooling.
Different causes are possible.
Call customer service.
The customer service number can be found in the
enclosed customer service directory.
Not a fault. The side panels contain pipes which heat
up during the cooling process. Units touching the ap-
pliance will not be damaged by the heat.
No action required.
A sensor is defective.
Call customer service.
The customer service number can be found in the
enclosed customer service directory.
The refrigerator compartment door is open.
Close the refrigerator compartment door.
Different causes are possible.
Press
a The alarm is switched off.
The freezer compartment door is open.
for 9–11 seconds until an
.
Troubleshooting en
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kg n seriesA2/kg39n2idfKg36n2idf18018061708095

Table of Contents