MSI P6N Ultra Series Manual page 21

16 Infrared Module Connector
This connector allows you to connect to infrared module and is compliant with Intel
Front Panel I/O Connectivity Design Guide. You must configure the setting through the
BIOS setup to use the infrared function.
17
Serial Port Connector
This connector is a 16550A high speed com m unication port that sends/receives 16
bytes FIFOs. You can attach a serial device.
18
Select eSATA Port / PCI_E1 Slot Jumper: J1, J2 (optional)
The eSATA port shares controller with the PCI_E1 slot. These jumpers allow you to
select either eSATA port or PCI_E1 slot to enable the deivce installed on it.
J1
J1
1 2
NC NC
Ground
VCC5
IRRX
IRTX
5 6
6
1
Enable the PCI_E1 slot. Disable the eSATA port.
J2
Enable the eSATA port. Disable the PCI_E slot.
J2
5
®
En-13