Assembly Instructions - Char-Griller Grillin' Pro E3001 Owner's Manual

Step 1: Insert the Long Legs and Short Legs into the opening ends of the Leg Cross
Bars. Then place the Leg Braces over the Legs and Leg Cross Bars and secure them
with Lock Washers and two 1/2" Hex Bolts per leg. (NOTE: The orientation of the
Leg Cross Bar is very important for later steps. The two holes on each Leg Cross Bar
must be facing toward the center of the assembly.)
Lock Washer
Hex Bolts
Leg Brace
OM3001E.1

Assembly Instructions

Leg Cross Bars
Short Legs
Leg Caps
Holes on Leg Cross Bars
TOP VIEW AFTER
ASSEMBLY
™ & © Char-Griller / A&J Mfg.
Lock Washer
Leg Brace
Hex Bolts
Long Legs
10