Table of Contents
Advertisement
1
1. Press the AUTO button to select desired
function.
2. Press the FOOD button repeatedly to set
the food class.
3. Press the +/- buttons to set the net
weight of the food to be cooked.
4. Press the WATTS button repeatedly to
adjust doneness.
5. Press the Start button.
(A)
Adjusting doneness
When using the Auto functions (except the Jet Defrost function), you also have the
possibility to personally control the end result through the Adjust doneness feature.
This feature enables you to achieve higher or lower end temperature or longer and
shorter time.
By choosing one of the Auto functions you choose the standard setting. This setting
normally gives you the best result. Perhaps the food you heated became too warm to
eat at once. You can easily adjust this before you use that function the next time.
This is done by selecting a higher or lower level with the WATTS button.
+
-
Note:
The doneness can only be set or altered before operation.
12
AUTO FUNCTIONS
4
2
5
3
If the weight is lesser or greater than
recommended weight:
Use the "Cook and reheat with microwaves"
to cook / defrost the food.
Note: In Auto forced air, some of the
programs do not have any weight input.
Frozen foods:
If the food is warmer than
deep-freeze temperature (-
18°C), choose lower weight of the
food.
If the food is colder than deep-
freeze temperature (-18°C),
choose higher weight of the food.
Increases the end temperature.
Decreases the end temperature.
The auto functions on this oven need
to know the net weight of the food. The
oven will then automatically calculate
the needed time to finish the defrost /
cooking procedure.
Advertisement
Table of Contents
