TOOLS, SUPPLIES, AND REQUIRED EQUIPMENT
Your model comes with a set of specialty metric tools. You'll need to purchase other items, available from your hobby dealer, to operate
and maintain your model.
SUPPLIED TOOLS AND EQUIPMENT
2.5mm "L" wrench
2.0mm "L" wrench
3-way flat wrench
Various pre-load spacers and shock
pistons (on parts tree) see page 26
1.5mm "L" wrench
Body clips and body
4-way wrench
washers
NiMH battery charger*
*Battery and charger style are subject to change and may vary from images. †Gear selection varies by model
Turnbuckle wrench
Optional Gearing
†
see page 27
7-cell NiMH battery pack with
Traxxas High-Current Connector*
REQUIRED EQUIPMENT
(sold separately)
4 AA alkaline
batteries
For more information on
batteries, see Use the Right
Batteries on page 15.
Recommended Equipment
These items are not required
for the operation of your
U-joint wrench
model, but are a good idea to
include in any R/C toolbox:
• Safety glasses
• Traxxas Ultra Premium Tire
Glue, Part #6468 (CA glue)
• Hobby knife
• Side cutters and/or needle
nose pliers
• Phillips screwdriver
Aftermarket servo
• Soldering iron
adapters
TRAXXAS • 7