Add Speed Point; Speed Limit Alert - HP f920 Series User Manual

3.4.2 Add Speed Point

You may customize speed cam positions in this product.
1. When the GPS positioning is completed , press
point manually.
2. This product features a capacity of 50 speed cam positions. In case you
are trying to add more than that the system prompts with message
"Speed Position is full".
Note:
You may delete custom speed cam positions by selecting the Delete Last Position or Delete All Position
option from the Speed Position Management menu. Please note that all of your existing speed cam positions
are deleted once the Delete All Position option is selected. Make sure you are ready to recreate your custom
speed cam positions before running this option.

3.4.3 Speed Limit Alert

If the Speed Limit Alert function is enabled, this product produces audible
alert and screen message once your car's location is determined by GPS and
its running speed exceeds the set limit.
To set the Speed Limit Alert, do the
following:
1. Press the
OSD menu.
2. Press the
Speed Limit Alert, and then press
OK
the
function menu.
3. Press the
product's alarm [Off / 50 ~ 200 km/h (30~125 mph)], and then press the
OK
button to complete setting.
4. Press the
5. The screen pops up red icon to remind you to slow down when you are
driving faster than the set speed limit.
button to enter the
/ button to select
button for entering
/ button to set up a Speed Limit Alert to trigger this
button to return recording screen.
23
to add speed camera