Sony FD Trinitron WEGA KV-27FS120 Operating Instructions Manual page 28

Connecting an Audio System
✍
If you are connecting a Home Theater, please refer to your Home Theater manual for additional
connections.
1
Using audio/video cables (not supplied), connect AUDIO OUT on your TV to one of the
unused line inputs (e.g. TV, AUX, TAPE2) on your stereo.
2
Set the Speaker option to Off. For more instructions, see "Using the Audio Menu" on page 29.
3
After you connect the audio system, you can control the volume level from your TV or
audio system.
❏
To control the volume from the TV, use the front panel controls or the VOL +/-
buttons on the remote.
❏
To control the volume through the connected audio system, open the Audio Out
option on the Audio Menu and select Fixed. For more instructions, see "Using the
Audio Menu" on page 29.
Rear of TV
Connecting a Camcorder (for playback)
To connect your camcorder, you can use the Audio/Video inputs on either the front or rear
panel of the TV. Using the audio/video cables (not supplied), connect the AUDIO/VIDEO
OUT on your camcorder to the AUDIO/VIDEO IN on your TV.
A/V output
Optional connection
❏
For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does
not provide sound, so you still must connect the audio cables.
20
AUDIO OUT
(VAR/FIX)
3
1 4
S VIDEO Y
P
B
P
R
AUDIO-L (white)
VIDEO
L L L
(MONO) (MONO)
R R R
AUDIO-R (red)
Front A/V Panel
Line
input
>PC<
Audio R (red)
Audio L (white)
Video (yellow)