Damage requiring service - Unplug the unit from the main AC power source and refer servicing to qualified service personnel when any damage to the equipment has occurred, such as: - the power supply cord or plug is damaged; Bosch Security Systems Quick Install MAN36IPB Rev.0 | 2008.10 Get other manuals https://www.bkmanuals.com...
Page 4
Attachments, changes, or modifications - Only use attachments/accessories specified by the manufacturer. Any change or modification of the equipment, not expressly approved by Bosch, could void the warranty or, in the case of an authorization agreement, authority to operate the equipment.
Page 5
The full version Installation Manual is available on the enclosed CD-ROM and can be viewed and printed out with Acrobat Reader, which is also on the enclosed CD-ROM. This user guide is the intellectual property of BOSCH Security Systems and is protected by copyright CAUTION! –...
This is necessary because the mounting holes need to be accessed. The lens may need to have its directional angle changed. 1.) Place the camera housing on a flat surface. MAN36IPB Rev.0 | 2008.10 Quick Install Bosch Security Systems Get other manuals https://www.bkmanuals.com...
Page 7
Tamper resistant Allen screws Housing Faceplate Tamper resistant Allen screws Layout of modules Camera/LED assembly mounting screw Housing LED illuminator module Camera, lens, photocell and foam cushion Bosch Security Systems Quick Install MAN36IPB Rev.0 | 2008.10 Get other manuals https://www.bkmanuals.com...
Page 8
This way no burrs or debris will fall into the housing. Ensure the power and video cables are not crimped or stressed after the camera has been mounted. MAN36IPB Rev.0 | 2008.10 Quick Install Bosch Security Systems Get other manuals https://www.bkmanuals.com...
Page 9
Photocell adjustment pot 2.3) LED array-power adjustments The EX36IP needs to be powered-up while making the LED power adjustments. Cover the photocell to turn the LEDs Bosch Security Systems Quick Install MAN36IPB Rev.0 | 2008.10 Get other manuals https://www.bkmanuals.com...
Page 10
2.) Connect the camera to the PC/laptop and power up the camera. Follow the prompts. See section 2 of full version Installation Manual available on the enclosed CD-ROM for more detail. MAN36IPB Rev.0 | 2008.10 Quick Install Bosch Security Systems Get other manuals https://www.bkmanuals.com...
1.) Slide the lens foam over the camera lens. Make sure the foam is snug and as close to the faceplate viewing window as possible and the photocell is secure with an unobstructed view. Bosch Security Systems Quick Install MAN36IPB Rev.0 | 2008.10...
Page 12
2.) Attach the faceplate to the camera housing. Insert and tighten the 6 bolts. 3.) Power-up the camera and check its operation. MAN36IPB Rev.0 | 2008.10 Quick Install Bosch Security Systems Get other manuals https://www.bkmanuals.com...
Page 13
Get other manuals https://www.bkmanuals.com...