Dell P84FP113G Service Manual page 105

Table 7. System setup options—Security menu (continued)
Security
Admin Password
System Password
Enable Master Password Lockout
Table 8. System setup options—Secure Boot menu
Secure Boot
Enable Secure Boot
Secure Boot Mode
Table 9. System setup options—Expert Key Management menu
Expert Key Management
Enable Custom Mode
Custom Mode Key Management
Table 10. System setup options—Performance menu
Performance
Intel Hyper-Threading Technology
Intel SpeedStep
Intel TurboBoost Technology
Multi-Core Support
Enable C-State Control
Sets, Changes, or deletes the administrator (admin) password (sometimes
called the "setup" password).
Sets, Changes, or deletes the system password.
Enables or disables the master password support.
Default: OFF.
Enables or disables the computer to boos using only validated boot software.
Default: OFF.
NOTE: For Secure Boot to be enabled, the computer needs to be in UEFI
boot mode and the Enable Legacy Option ROMs option needs to be turned
off.
Selects the Secure Boot operation mode.
Default: Deployed Mode.
NOTE: Deployed Mode should be selected for normal operation of Secure
Boot.
Enables or disables the keys in the PK, KEK, db, and dbx security key databases
to be modified.
Default: OFF.
Selects the custom values for expert key management.
Default: PK.
Enables or disables the Intel Hyper-Threading Technology to use processor
resources more efficiently.
Default: ON.
Enables or disables the Intel SpeedStep Technology to dynamically adjust
processor voltage and core frequency, decreasing average power consumption
and heat production.
Default: ON.
Enabled or disabled the Intel TurboBoost mode of the processor. If enabled,
the Intel TurboBoost driver increases the performance of the CPU or graphics
processor.
Default: ON.
Changes the number of CPU cores available to the operating system. The
default value is set to the maximum number of cores.
Default: All Cores.
Enables or disables the CPU's ability to enter and exit low-power states.
System setup 105