2 Cycle Guide - LG WT901CF Owner's Manual

22
USING YOUR WASHING MACHINE
CYCLE GUIDE
The cycle guide below shows the default settings, available options
and recommended fabric types for each cycle. Allowable modifier ad-
justments are shown below the default setting for each cycle.
Fabric or
Cycle
Load Type
Cotton,
linen,towels,
Normal
shirts,sheets,
jeans,mixed loads
Heavy
Heavy soiled
cotton fabrics
Duty
Large items
such as blankets
and comforters
* Use the BULKY cycle for items such as pillows, comforters, pet bedding and other articles
Bulky
which have difficulty absorbing water. DO NOT WASH EXCESSIVELY LARGE ITEMS. If
large/bulky items do not fit easily into the tub, there may not be enough room for them to
move during washing. Keep like items together; do not mix large bulky items with smaller
clothing items. Failure to follow these instructions may result in damage to the clothing or to
the washer.
Tub Clean
Speed
Wash
Delicates
Rinse+Spin
Spin Only
NOTE:
To protect your garments, not every wash/rinse temperature, soil level, or option is available with every cycle
A chime will sound and the LED will not light if the selection is not allowed.
*When a cycle is selected, the default time for that cycle is displayed. This time will change as modifiers or
options are selected. Once the START/PAUSE button is pressed, the washer will measure the size of the
load. The estimated time may change once the load size has been measured. The washer automatically
adjusts the wash time for the amount of laundry, water pressure, water and other operating conditions.
*If you load excessive items into the washer, washer will alternate 3 times soak cycle, this means washer
will not operate for 4 minutes. This operation is normal to remove the dirt and grime, in order to reduce the
risk of fire and electrick shock.
Wash Temp. Soil Level
Warm Normal
Hot Heavy
Cold Light
Warm Heavy
Hot Normal
Cold Light
Warm Normal
Hot Heavy
Cold Light
Cold Light
Warm Light
Hot Heavy
Cold Normal
Cold Light
Warm Heavy
Normal
Cold
Extra Fabric
Rinse Softener
= AVAILABLE OPTION
= Default Setting
Water
Plus