Sony BRAVIA KDL-40E55 Series Operating Instructions Manual page 54

Condition
Some input sources cannot be
selected.
The remote does not function. • Replace the batteries.
You have a blank TV listings
in the GUIDE Plus+ System
HDMI equipment does not
appear on "HDMI Device
List".
You cannot select "Off" in
"Control for HDMI".
Not all channels are tuned for
cable.
54
GB
Explanation/Solution
• Select "AV Preset" and cancel the "Skip" setting for the input source
(page 39).
• Check the aerial/cable connection.
• Your cabling and set-up is OK, but your GUIDE Plus+ System was not
connected for enough time to receive TV listings data. Leave the TV
"STANDBY" overnight (24 hours) or use "Manual Data Download"
(page 19) .
• You live in a country/region where the GUIDE Plus+ System is not yet
available. Check the list of countries to see if you are in a region that is
supported.
http://www.europe.guideplus.com/
• Check that your equipment is compatible with Control for HDMI.
• If you have connected any audio system that is compatible with Control
for HDMI, you cannot select "Off" in this menu. If you want to change
the audio output to the TV speaker, select "TV Speaker" in the
"Speaker" menu (page 38).
• Check the support website for cable provide information.
http://support.sony-europe.com/TV/DVBC/