Table of Contents
Advertisement
ON
OFF
Tips
When you set this item to [ON] and touch
The demonstration will be suspended:
When you press START/STOP or PHOTO
When you touch the screen during the demonstration (The demonstration starts again after about 10
minutes)
When you turn on the
When you press
A movie you have recorded will be registered as the demonstration movie if the movie satisfies all of the
following conditions.
The movie is protected
The movie is the first one displayed on the VISUAL INDEX screen
The movie is saved on the internal memory
The movie is recorded with high definition image quality (HD)
CALIBRATION
See page 123.
CTRL FOR HDMI (Control for HDMI)
When connecting your camcorder to a "BRAVIA" Sync compatible TV with the HDMI cable
(sold separately), you can play back movies on your camcorder by aiming the TV's Remote
Commander at the TV (p. 51).
Steps
(MENU)
[CTRL FOR HDMI]
ON
OFF
REC LAMP (Recording lamp)
You can make the camera recording lamp on the front of your camcorder not to turn on.
Steps
(MENU)
[REC LAMP]
a desired setting
ON
OFF
The demonstration appears.
The demonstration does not appear.
(Photo) lamp
(VIEW IMAGES)
[OTHER SETTINGS] (under
a desired setting
Operates your camcorder using the TV's Remote Commander.
Does not operate your camcorder using the TV's Remote Commander.
[OTHER SETTINGS] (under
The camera recording lamp lights up.
The camera recording lamp does not light up.
, the demonstration starts playing.
[GENERAL SET] category)
[GENERAL SET] category)
100
Advertisement
Table of Contents
