Organization Of The User's Manual - AT&T 7506 User Manual

Organization of the User´s Manual
This manual is arranged into the following chapters.
Chapter 1: Introduction
Chapter 2: Getting Started — Explains how to set some data options from the keypad and
how to make a data call.
Chapter 3: Using the CMD and AT Commands — Explains when to type commands, and
how to use CMD and AT Local Mode Commands.
Chapter 4: Data Options and Profiles — Gives definitions of data options used to set up
your ADM and explains how to create data profiles.
Chapter 5: Testing — Describes local and remote loopback test procedures.
Chapter 6: Technical Information — Provides reference-type material for technical
personnel.
Chapter 7: Troubleshooting — Provides information on using the Data ZAP command and
the self-test to clear a locked-up ADM.
Appendix A: Cause Code Tables — Provides cause messages that may occur during data
call set-up.
Conventions of this Manual
The following conventions are used in this manual:
Items in rounded boxes (for example,
Information to be entered by the user on the data terminal keyboard, for example, commands
or command options, appear in this font: DIAL 3784 .
The touch-tone keys on the voice terminal are referred to as the keypad.
Messages appearing on the terminal display or the data terminal screen are shown in this
font: Quit?
If the manual instructs you to type H for help, dial when you are making a data call, and so
forth, you can type any and all information in either lowercase or uppercase — whichever
you find easier.
Items in italics, such as nnn, represent numeric variables.
1-4 Introduction
), represent buttons and keys to be pressed.
RETURN