Network Settings - NEC NP-V260 User Manual

Network Settings

http://<the projector's IP address> /index.html
DHCP ..................................Enabling this option automatically assigns an IP address to the projector from your DHCP server.
IP ADDRESS .......................Set your IP address of the network connected to the projector when [DISABLE] is selected for
SUBNET MASK ...................Set your subnet mask number of the network connected to the projector when [DISABLE] is selected
DEFAULT GATEWAY ................Set your default gateway of the network connected to the projector when [DISABLE] is selected for
DNS (PRIMARY) .................Set your primary DNS settings of the network connected to the projector.
DNS (SECONDARY) .................Set your secondary DNS settings of the network connected to the projector.
UPDATE ..............................Reflect your settings.
TIP: Selecting [NETWORK SETTINGS] for [RESET] from the projector's menu allows you to return the following items to the factory
default.
[DHCP]: DISABLE/ [IP ADDRESS]: 192.168.0.10/ [SUBNET MASK]: 255.255.255.0/ [DEFAULT GATEWAY]: 192.168.0.1
* [DNS(PRIMARY)] and [DNS(SECONDARY)] will remain unchanged.
TIP: The CRESTRON CONTROL settings are required only for use with Crestron RoomView.
For more information, visit http://www.crestron.com
Disabling this option allows you to register the IP address or subnet mask number obtained from
your network administrator.
TIP: You can check the IP address in the menu when [ENABLE] is selected for [DHCP].
To do so, from the menu, select [INFO.]
[DHCP].
TIP: You can check your specified IP address in the menu
To do so, from the menu, select [INFO.] → [WIRED LAN] .
for [DHCP].
[DHCP].
NOTE: Close the browser after clicking [UPDATE]. The projector will automatically update your
settings.
46
4. Convenient Features