La Crosse Technology SW403 Manual page 10

Temperature allert function control
 There are two ways to set the temperature alarm. Use the weather station button to operate the settings or
click the alarm setting item in the Tuya APP interface to set.
Button operation of weather station
 Short press the " " button to turn on or off the temperature alarm function. When the temperature alarm is
turned on, the icon " " of the temperature upper and lower limit alarms is displayed
 Press and hold the " " button for 3 seconds to enter the temperature alert setting mode.
 Press and release the "
 Press and release the " " button to confirm and move to the next item.
Note: Note: After 20 seconds without pressing any button to exit the settings.
Note: Set Outdoor Temperature | Humidity alert, press and release the "
channels. (A total of 3 channels:
Settings order:
1. Indoor temperature upper limit alert value
2. Indoor temperature lower limit alert value
3. Outdoor temperature upper limit alert value
4. Outdoor temperature lower limit alert value
APP setting temperature alert
 According to the picture, switch to the main panel, click "temperature alert" in the panel, jump to the second
interface, click the corresponding temperature alarm menu of different channels to jump to the third
interface. In the third interface, click the slider to turn on or off the corresponding alarm function, and set the
upper and lower limits of the alarm by sliding the temperature value. After the setting is completed, click
"Confirm" to complete the setting
Main interface
SW403 Manual
" or " " button to adjust the value. Hold the "
| | )
second interface
" or " " button to adjust quickly.
" button to switch to other
third interface