Motorola CPEi 825 Series Regulatory Manual page 21

Ring Tone Tab
Caller ID Tab
The Ring Tone tab allows you to customize ring tones for your telephone(s).
NOTE
You need a phone connected to your CPE to hear ring tones.
Table 3-9 Ring Tone Tab
Field or Button
Default Line 1 Ring Type
Test
Default Line 2 Ring Type
Test
Be sure to click the Apply button once you have made changes.
The Caller ID tab allows you to manage the Caller ID functions for your telephones:
Table 3-10 Caller ID Tab
Field or Button
Enable Line 1 Anonymous Incoming Call
Rejection
Enable Line 1 Permanent Anonymous
Outgoing Call
Enable Line 2 Anonymous Incoming Call
Rejection
Description
Use the drop-down box to select a ring
tone for Line 1. The default is ringtone R0.
Click to hear how the selected ring tone
sounds.
Use the drop-down box to select a ring
tone for Line 2. The default is ringtone R0.
Click to hear how the selected ring tone
sounds.
Description
If Line 1 is your active telephone port,
check this box if you would like to reject
telephone calls from anonymous incoming
callers. The default is checked.
If Line 1 is your active telephone port,
check this box if you would like to
permanently block your telephone number
from appearing on others' Caller ID. The
default is unchecked.
If Line 2 is your active telephone port,
check this box if you would like to reject
telephone calls from anonymous incoming
callers. The default is checked.