Canon EOS 4000D Instruction Manual page 245

The [Default] setting for printing effects and other options are the

printer's own default settings as set by the printer's manufacturer. Refer
to the printer's instruction manual to find out what the [Default] settings
are.
Depending on the image's file size and image-recording quality, it may

take some time for the printing to start after you select [Print].
If image tilt correction (p.247) is applied, it may take longer to print the

image.
To stop the printing, press <

[OK].
If you execute [Clear all camera settings] (p.192), all the settings will

revert to their defaults.
Set the date and file number
5
imprinting.
Set them if necessary.

Select <I>, then press <0>.

Set the print settings as desired, then

press <0>.
Set the number of copies.
6
Set it if necessary.

Select <R>, then press <0>.

Set the number of copies, then press

<0>.
Start printing.
7
Select [Print], then press <0>.

> while [Stop] is displayed, then select
0
w Printing
245